Regularly cleaning the pre-filter in your Ice Barrel Chiller is essential for maintaining efficient water flow and preventing clogs. Follow these steps for both routine and deep cleaning of the pre-filter:
Routine Cleaning
-
Accessing the Pre-Filter:
- Locate the pre-filter at the bottom bulkhead inside the Ice Barrel.
-
Cleaning:
- Visually inspect the pre-filter for debris.
- Gently remove any debris from the filter slots using your fingers or a soft brush.
Deep Cleaning
-
Preparation:
- Enter Maintenance Mode: This can be done directly from the Chiller's settings menu or via the Ice Barrel App.
- Water Shutoff: Locate the quick-connect water valves on the top and bottom bulkheads of the Ice Barrel. Shut these valves to stop water flow before disconnecting any hoses.
-
Cleaning:
- For thorough cleaning, remove the pre-filter by turning it counter-clockwise by hand.
- Rinse the pre-filter under running water and use a soft-bristled brush if needed to remove any buildup.
- Shake off excess water and ensure the pre-filter is clean and debris-free before reinstalling.
-
Reinstallation:
- Reinsert the pre-filter by hand, ensuring it is properly seated and secure.
-
Restoring Operations:
- Open Water Valves: Open both bulkhead valves to allow water flow and exit Maintenance Mode, resuming normal operations.
After Cleaning
- Regular cleaning helps maintain optimal performance.
- There is no need to replace the pre-filter unless it is damaged.