Cooling
The Chiller is actively working to lower the temperature to your chosen setting. During this mode, smart sensors monitor progress toward the desired setpoint, adjusting for factors like ambient air temperature and real-time water temperature.
- Note: The Chiller will always start cooling prior to a scheduled session and actively monitors real-time data to determine the optimal start time. This process falls under our proprietary Time to Temperature Engine, which we are continuously tuning for greater accuracy. During the first six months of its learning period, the Chiller may reach the setpoint early but will always hold the temperature for the scheduled time. As the system learns, the accuracy of the start time will improve, achieving greater energy efficiency while still meeting the scheduled setpoint.
Ready
This status means the Chiller has reached the set temperature, and the ice bath is prepared for use. It will hold the temperature until the end of the scheduled session. If you start an instant session by switching the Chiller into cooling mode, it will hold the temperature for three hours. See the Scheduling section to understand how manual control may affect scheduling.
- Note: During Ready mode, the Chiller will maintain the temperature within ±3°F of the setpoint. If the temperature rises above this range, the Chiller will automatically cool the water back down to the desired setpoint. This may occur frequently due to external factors such as sunlight, ambient air temperature, and the number of people using the ice bath.
SmartSense
When the Chiller isn’t actively cooling, it enters SmartSense mode using data and sensors to intelligently manage its operation and to be ready for the next use.
- Note: In SmartSense mode, the Chiller samples the water every 10 minutes to maintain accurate temperature information and assist with filtration. The Chiller will also maintain the water temperature within a 10°F band relative to the current and upcoming setpoint. This ensures it can quickly reach the desired temperature for an instant or scheduled session while conserving energy.
Maintenance
The Chiller is not actively cooling or pumping water, allowing you to change the water filter. *See the Maintenance section for more information.
Protect
This mode is triggered automatically only when there has been an event that the Chiller has deemed potentially harmful to the system. During this state, certain operations will be shut down, and you will be notified of the next steps via the app and the user interface on the Chiller.